CDYJK - RESIN COATING SOLUTION
- MSDS: CDYJK
- Manufacturer: GE SILICONES
- Product Name: RESIN COATING SOLUTION
- National Stock Number: 5970-01-333-7571
Product Identification
Product ID:RESIN COATING SOLUTION
MSDS Date:02/06/1996
FSC:5970
NIIN:01-333-7571
MSDS Number: CDYJK
Responsible Party
WATERFORD, NY 12188
US
Emergency Phone: 518-237-3330
Info Phone: 518-237-3330
Preparer: CE HANNIGAN
Cage: GESIL
Contractor
Telephone: 215-743-8200
Cage: 2B613
Ingredients
BENZENE (SARA 313) (CERCLA)
CAS: 71-43-2
RTECS: CY1400000
Fraction By Weight: <.045%
OSHA PEL SEE 1910.1028
ACGIH TLV: 10 PPM; A2; 9596
EPA Report Quantity: 10 LBS
DOT Report Quantity: 10 LBS
TOLUENE (SARA 313) (CERCLA)
CAS: 108-88-3
RTECS: XS5250000
Fraction By Weight: 30-60%
OSHA PEL 200 PPM; Z-2
ACGIH TLV: S, 50 PPM; 9596
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
TRIMETHYLATED SILICA
CAS: 68988-56-7
Fraction By Weight: 30-60%
POLYDIMETHYLSILOXANE
CAS: 70131-67-8
Fraction By Weight: 10-30%
Hazards
LD50 LC50 Mixture:ORAL LD50 (RAT): 3,800 MG/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EXCESSIVE INHALATION CAUSES HEADACHE,
DIZZINESS, NAUSEA, INCOORDINATION, IRRITATION OF MOUTH/NOSE/THROAT.
SKIN CONTACT CAUSES DRYING, IRRITATION. EYE CONTACT CAUSES SEVERE
EYE IRRITATION. INGESTION CA USES VOMITING, NAUSEA, DIARRHEA,
IRRITATION OF MOUTH, THROAT, STOMACH. ASPIRATION HAZARD.
Explanation of Carcinogenicity:THIS COMPOUND CONTAINS NO INGREDIENTS AT
CONCENTRATIONS OF 0.1% OR GREATER THAT ARE CARCINOGENS OR SUSPECT
CARCINOGENS.
Effects of Overexposure:HEADACHES, DIZZINESS, NAUSEA, INCOORDINATION,
MOUTH/NOSE/THROAT IRRITATION, UNCONSCIOUSNESS, SKIN IRRITATION, EYE
IRRITATION/REDNESS/TEARING/BLURRED VISION, STOMACH IRRITATION.
CHEMICAL PNEUMONIA.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYES: FLUSH WITH WATER FOR 15 MINUTES WHILE HOLDING EYELIDS
OPEN. GET MEDICAL ATTENTION. SKIN: REMOVE CONTAMINATED CLOTHING.
WASH WITH SOAP AND WATER. IF IRRITATION PERSIST, GET MEDICAL
ATTENTION. INH ALATION: REMOVE TO FRESH AIR. RESTORE BREATHING. GET
MEDICAL ATTENTION. INGESTION: DO NOT INDUCE VOMITING. SLOWLY DILUTE
WITH 1-2 GLASSES OF WATER IF CONSCIOUS. GET MEDICAL ATTENTION.
Fire Fighting
Flash Point Method:PMCC
Flash Point:=4.4C, 40.F
Lower Limits:1.20 %
Upper Limits:7.00 %
Extinguishing Media:ALL STANDARD FIREFIGHTING MEDIA.
Fire Fighting Procedures:FIRE FIGHTERS SHOULD WEAR SELF CONTAINED
BREATHING APPARATUS AND FULL PROTECTIVE GEAR. COOL TANKS AND
CONTAINERS EXPOSED TO FIRE WITH WATER.
Unusual Fire/Explosion Hazard:SENSITIVITY TO STATIC DISCHARGE IS
EXPECTED. MATERIAL HAS A FLASH POINT BELOW 200F.
Accidental Release
Spill Release Procedures:WIPE, SCRAP OR SOAK UP IN AN INERT MATERIAL
AND PUT IN A CONTAINER FOR DISPOSAL. WEAR PROPER PROTECTIVE
EQUIPMENT. REMOVE SOURCES OF IGNITION. WARN OTHER WORKERS OF SPILL.
INCREASE AREA VENTILATION.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:USE GROUND STRAP. RECOMMENDED STORAGE
IN ORIGIANL CONTAINER BELOW 30C. KEEP CONTAINER CLOSED WHEN NOT IN
USE. AVOID BREATHING VAPORS.
Other Precautions:USE ONLY IN A WELL VENTILATED AREA. DO NOT INHALE
VAPORS. AVOID CONTACT WITH SKIN AND EYES.
Exposure Controls
Respiratory Protection:IF EXPOSURE MAY OR DOES EXCEED OCCUPATION
EXPOSURE LIMITS USE A NIOSH-APPROVED RESPIRATOR TO PREVENT
OVEREXPOSURE. IN ACCORD WITH 29 CFR 1910.134 USE EITHER AN
ATMOSPHERE-SUPPLYING RESPIRATOR OR AN AI R-PURIFYING RESPIRATOR.
Ventilation:EXHAUST VENTILATION SUFFICIENT TO KEEP AIRBORNE
CONCENTRATIONS BELOW RESPECTIVE TLV'S.
Protective Gloves:RUBBER
Eye Protection:CHEMICAL GOGGLES, SAFETY GLASSES W/SIDES
Other Protective Equipment:CHEMICAL RESISTANT CLOTHING AS NECESSARY TO
PREVENT SKIN CONTACT. AN EMERGENCY EYEWASH AND SHOWER SHOULD BE
AVAILABLE.
Work Hygienic Practices:WASH HANDS THOROUGHLY WITH SOAP AND WATER
BEFORE EATING, DRINKING, SMOKING OR USING TOILET FACILITIES.
Supplemental Safety and Health
REMOVE AND WASH CONTAMINATED CLOTHING BEFORE REUSE.
Chemical Properties
HCC:F2
Boiling Pt:=111.1C, 232.F
Vapor Pres:22
Vapor Density:3.2
Spec Gravity:.969
Evaporation Rate & Reference:1.9 (N-BUTYL ACETATE=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:CLEAR LIQUID WITH AROMATIC ODOR
Percent Volatiles by Volume:50 %
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS
Stability Condition to Avoid:KEEP AWAY FROM HEAT, SPARKS, AND FLAME.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
SILICON DIOXIDE, FORMALDEHYDE
Disposal
Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT. DISCARD ANY PRODUCT, RESIDUE, DISPOSAL CONTAINER OR
LINER IN ACCORDANCE WITH ALL FEDERAL, STATE AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.